Polyester-based Thermoplastic Polyurethane
|Hardness (after 3 sec.)||M||ISO 7619||95||Shore A|
|Softening range low||E||Huntsman TMA||65||°C|
|Softening range high||E||Huntsman TMA||70||°C|
M = Injection molded parts to meet DIN & ASTM requirements. Parts at room temperature aged prior to testing.
E = Extruded film cut to ASTM requirements. Parts at room temperature aged prior to testing.
Melt Volume Rate [170°C / 10kg] ISO 1133-1 = 75 cm³/10min.
This IROSTIC grade can be used as a part of a reactive hotmelt system.
The processing temperature is 80°C.
Full bonding strength will be reached after 24 hours.