Polycaprolactone-based Thermoplastic Polyurethane
Properties | Key | NORM | Value | Unit |
---|---|---|---|---|
Solution viscosity range - 03 | V1 | Huntsman | 200 - 400 | mPa*s |
Solution viscosity range - 12 | V1 | Huntsman | 1000 - 1400 | mPa*s |
Solution viscosity range - 16 | V1 | Huntsman | 1400 - 1800 | mPa*s |
Solution viscosity range - 18 | V1 | Huntsman | 1600 - 2000 | mPa*s |
Density | ISO 1183-1 | 1,20 | g/cm³ | |
Minimum activation temperature | Huntsman | 25 - 40 | °C | |
Type of use | 1 or 2 component |
V1 = viscosity (Brookfield RVT) at 20°C for 15% solid in MEK.
This IROSTIC grade can be used as a 2-component system in combination with our IRODUR product range.
Clean and dry parts to be bonded.
If possible, roughen the two surfaces using abrasive material.
Apply a thin layer of adhesive solution.
Dry surfaces for approx. 30 min to allow solvent evaporation.
Activate both surfaces by warming up to 25 - 40°C.
Press surfaces together for 30 seconds.
The bonding is stable after approx. 1 minute.
Full bonding strength will be reached after 24 hours.
Please note that the procedure described here is for the adhesive solution prepared with the IROSTIC.